Parlantes Sony XS-N6950 600W 6X9

ESPECIFICACIONES:

Tamaño y peso

PESO
1520 g

Sistema de parlantes

CONFIGURACIÓN
Coaxiales de 5 vías de rango completo de 6 pulg.

TAMAÑO
16 cm

Características generales

POTENCIA MÁXIMA
600 W

POTENCIA NOMINAL
85 W

Woofer

MATERIAL DEL DIAFRAGMA DEL WOOFER
Cono

MATERIAL DEL IMÁN DEL WOOFER
Ferrita

Tweeter

MATERIAL DEL DIAFRAGMA DEL TWEETER
PEI
DIÁMETRO
66 mm

MATERIAL DEL IMÁN DEL TWEETER
Ferrita

Parlantes Pioneer TS-A6976R 550w 6x9

ESPECIFICACIONES:

GENERAL

Size 6"x9"
Design 3-Way
Tweeter Design Cone
Tweeter Composition PET
Tweeter Magnet Composition Strontium Ferrite
Woofer Composition Multilayer Mica Matrix
Woofer Surround Elastic Polymer Surround
Woofer Magnet Composition Ferrite
Warranty 1 Year

INSTALLATION SPECIFICATION

Max. Music Power (Nominal) 550W (90W)
Frequency Response 27Hz-24kHz
Sensitivity (1W/1 m) 92dB
Impedance 4ohm
Crossover Frequency 3400Hz
Mounting Depth 3-1/4"
Cut-Out Dimensions 8-3/4"x 6"

Medios Kenwood KFC-PSM60 400W

ESPECIFICACIONES:

  • Woofer

Size 160mm 6-1/2in.
Diaphragm Paper Cone
Surround Corrugation
Basket Steel : Black
Magnet Ferrite φ127*t18

  • Woofer (Unit)

Width (w_Gr) 188.0mm 7-5/16in.
Width (w/o_Gr) 173.0mm 6-13/16in.
Height (w_Gr) 188.0mm 7-5/16in.
Height (w/o_Gr) 173.0mm 6-13/16in.
Cutout Diameter 145.0mm 5-11/16in.
Tweeter Height - -
Depth (w_Gr) 82.5mm 3-1/4in.
Depth (w/o_Gr) 68.0mm 2-11/16in.
Mounting Depth 62.0mm 2-7/16in.

  • WEIGHT

with Grille (pc.) 2,500g 5.5lbs
without Grille (pc.) 2,400g 5.3lbs
Gross Weight 2.9kg 6.4lbs
Weight of Magnet 905g 31.9oz

  • POWER HANDLING

Peak Power (KITS SPEC) 400 W
Rated Power (KITS SPEC) 100 W

  • SENSITIVITY

94 db / W at 1m

  • FREQUENCY RESPONSE

95Hz- 5kHz
Impedance 4ohms

  • ACCESSORY

Grille *2
Screw sets 
φ4*35 *8

  • SPECIAL FEATURE

Push Tarmnal

Bajo db Drive KSF-10D4

ESPECIFICACIONES:

10" DVC Flat Subwoofer / 500 Watts / Dual 4 Ohm Voice Coil

Features:

  • 3”, 4 layer Dual 4 Ω Voice Coil
  • Ultra Shallow Stamped Steel Frame Design
  • PP Coated Paper Cone with Foam Surround
  • Paper Sub Cone
  • Ferrite Magnet
  • Black Finished Top and Bottom Plates
  • Mixed Cotton Spider
  • PVC Trim Ring/Gasket
  • Heavy Gauge Spring Terminals

Parlantes Lanzar pro TE 52.5

------ AGOTADO ------

ESPECIFICACIONES:

  • Progressive Suspension for Superior Performance at Low and High-Power Aplications
  • 4 OHM Impedance
  • 19 mm Metalized PEI Tweeter with Flush and Surface Mounting Hardware
  • In-Line 12dB High and 6dB Low-Pass Crossover With Tweeter Protection
  • UV Coated Paper/Fiber Blend Cone with NBR Surround
  • 1" TWO-Layer Copper Voice Coil on Kapton Former 
  • 75W RMS/150W Nominal/300W Max Music Power
  • Compatible with Euro Mounting

Parlante Rockford Fosgate R165X3 Prime 6.50" 3-Way

 

ESPECIFICACIONES:

The R165X3 is a 6.50” 3-way full-range speaker rated at 45 watts RMS for a new generation of factory replacement speakers. Kit includes two speakers with grilles, integrated high-pass crossovers and mounting hardware.

  • Vacuum Polypropylene cone
  • Rubber surround
  • Stamped steel basket
  • Silk dome pole mounted Piezo tweeter and midrange
  • Integrated tweeter crossover
  • Grilles and mounting hardware included

Parlante Rockford Fosgate R14X2 Prime 4" 2-Way

ESPECIFICACIONES:

The R14X2 is a 4” 2-way full-range speaker rated at 30 watts RMS for a new generation of factory replacement speakers. Kit includes two speakers with grilles, integrated high-pass crossovers and mounting hardware.

  • Vacuum Polypropylene cone
  • Rubber surround
  • Stamped steel basket
  • Silk dome flush mounted tweeter
  • Integrated tweeter crossover
  • Grilles and mounting hardware included

Componente Rockford Fosgate T1650-S Power 6.50" 2-Way Euro Fit Compatible

ESPECIFICACIONES:

The Power T1650-S is a T1 component system with a separate tweeter and a true 6.5" midrange optimized for a wide variety of U.S., European, and import vehicles. Supplied with an external tweeter crossover.

  • Injection molded carbon fiber filled polypropylene cone
  • Linear high excursion matched motor magnetics and suspension design
  • 1" treated fabric dome tweeter
  • VAST vertical attach surround technique
  • Santoprene rubber surround
  • High temp aluminum voice coil
  • Fatigue and tear resistant poly cotton spider
  • FlexFit 2 mounting
  • Stamp-cast aluminum frame
  • Asymetrical 18dB HP and 12dB LP external crossover network
  • User selectable tweeter level, bi-amp, and on/off axis switching
  • Flush and surface (angled) tweeter mounting hardware included
  • Grilles and mounting hardware included

Páginas